**** We are now closed for pre-Christmas Orders and will re-open on January 4th 2022 ****
Multi apertures > Mixed Print sizes
£49.50
£44.50
£54..50
£37.99
£38.99
£28.99
£29.99
£29.99
£35.99
£35.99
£35.99
£35.99
£.33.99
£.37.99
£.39.99
Select the number of apertures required. To see the aperture sizes available in each layout, please click here
Standard Frame Options
Black – 28mm wide
Dark Grey – 28mm wide
Light Grey – 28mm wide
White – 28mm wide
We have a wider range of frame options available, please view by clicking below
Frame Specifications
This image gives details of the various frame measurements which make up the frames. More information is below.
I use ArtBak Conservation backing board in all the frames I make. Art-Bak fluted backing boards have a slight bow for flatter artwork and to help hold your prints against the mount.
Spring Clips keep pressure on back board which holds your pictures/prints against the mountboard.
The hangers pack includes screws, D-Rings, cord and bumpers. Frames are pre-drilled.
Aperture Size
The aperture size is the opening width & height. The apertures in the mounts are smaller by 5mm all round to allow the mount to hold the prints in place.
Border
The border width – which is the ‘visible’ mountboard surrounding the apertures, is approx.40mm depending on the rebate width of frame option chosen.
Gutter Width
Gutter Width The space between the apertures is approx. 23mm – 28mm depending on print size.
Moulding Width
The frame or moulding width is the distance in mm’s from the outside of the frame to the inner edge or glass. The frames I use are approx. 28mm wide x 20mm deep.
Hangers
Holes for screws are pre-drilled. The D-rings supplied will be single or double hole depending on the size of the frame.
Bumpers
These are placed on the bottom corners of the frame, to allow air circulation, prevent movement and marks to the wall.
Request A Quote
Please complete the form below. We will respond as soon as possible.
